Usb drive not recognized

[wanderer]

My Kingston datatraveler usb does not get picked up anymore.

I insert it and windows alerts “You need to format this drive”.

I choose to format as theres nothing important on there, I get “Unable to complete the format”.

Is there a command or program to fix this?!?!?

 

[root]

Hey @wanderer - welcome to Computer Forums

What I would try for this, is to clean and format the drive using Diskpart.

1. Right Click on the start menu and choose ‘PowerShell - Admin’.
2. In the box, type diskpart and hit enter.
3. Type: list disk then it should show you a list of drives. Find the number of your drive, normally it will indicate the capacity e.g 16G, 32G depending on your drive. Be 100% sure it’s the right one!
4. Type select disk X - entering the actual correct number for your drive for X.
5. Type the following commands one after the other. It may tae a little while for each one to run:
   clean
create partition primary
format fs=fat32 quick
6. Unplug and replug the USB drive, Windows should now hopefully recognise it. If not the drive may be broken.

Please could you come back and let us know if this has worked for you?

 

[crazyinside]

One thing to try might be to format the disk on another system, this has worked for me before!

 

[wanderer]

Took cople of attempts but the commands worked. thank you

 

[root]

Glad it’s sorted! If you have any issues in the future you know where we are now