Get full forum access in 30 seconds

Register free to post replies, bookmark threads and follow updates.

George Green

Member
Posts: 19
I am trying to re-install windows 11 on my laptop but the C: drive is not showing on the laptop .my SSD has nothing on it so when installing windows 11 and trying to install VRD driver I am getting error.
1) I can't use Disk Management because there is nothing on the SSD
2) There no option in BIOS to enable C:drive
3) The SSD is showing in diagnostic but no in diskpart
4) Its a HP Pavillion x360
 
Does the disk appear anywhere within your BIOS?

It's probably also worth resetting BIOS settings to default, some have settings for RAID/SATA that can cause disks to not appear in the installer.
 
The reason your C: drive (SSD) is not showing up is because Windows 11 does not natively include the storage controllers for newer intel processors (11th generation and newer). When you try to install the Intel Rapid Storage Technology (RST) VMD driver to fix this, it throws an error if the files are not correctly extracted first.

I will suggest the easiest method.

Disable VMD in BIOS (Easiest & Fastest)
Instead of dealing with driver files, you can turn off Intel's VMD controller. This forces your laptop to recognize the SSD directly as a normal NVMe drive.

  1. Restart your laptop and continuously tap the BIOS key (usually F11
  2. Use the arrow keys to navigate to the Advanced, Storage, or Configuration tab.
  3. Look for Intel VMD Setup Menu, VMD Controller, or SATA Mode.
  4. Change the setting from Enabled to Disabled (or change from RAID to AHCI).
  5. Press F10 to save your changes and exit.
  6. Boot back into your Windows 11 installation USB, and your SSD should now be completely visible.
 
The SSD does not need a C: drive letter yet; Windows Setup assigns one after installation. At the install screen, press Shift+F10, run diskpart, then list disk. If it still isn’t listed, try the storage driver from HP’s support page for your exact Pavilion model, extracted to a USB drive. VMD may not be exposed in every BIOS.
 
When I tried to install windows 11 at the stage where it need to install driver I tried to install intel RST/VMD but I got error message.
Now I want to try HP driver as you suggested but I can't find the exact driver , the laptop is HP Pavillion x360 product # 4p8e4ua #aba, Convertible 14m-dyv xxx
 
Try entering 4P8E4UA (without the “#ABA”) on HP’s Drivers and Software page, then choose Windows 11 and look under storage drivers for Intel Rapid Storage Technology. HP packages are often SoftPaq installers; run it on another PC to extract the files, then copy the extracted folder to USB. In Windows Setup, choose Load driver and browse to the folder containing the .inf files, not just the original download
 
I download the HP RST to the usb drive but when I tried to load driver with the windows installer the hP RSt is not showing on the usb but when I put the usb in my other computer it shows the HPUP application.
 
Windows Setup won’t list the HPUP application itself as a driver. It needs the extracted driver files, especially the .inf file.

On the working computer, run the HP download and let it extract its files. HP packages often unpack to C:\SWSetup\SPxxxxx; look there for a folder containing .inf, .sys, and `.cat
 
Great, glad you got Windows 11 installed. Once you’re at the desktop, run Windows Update, then check HP’s support page for any remaining drivers for your 4P8E4UA, especially chipset, graphics, Wi-Fi, and touchpad. If everything works and Device Manager shows no unknown devices, you don’t need to install RST separately; it was needed to let Setup see the drive.
 
Congrats on managing to get around the issue and getting Windows back on. These things really do feel like a battle sometimes... I'm glad it was something resolvable rather than a hardware failure!

Do you know what the final resolution was?
 

Ready to join the discussion?

Create your account to reply, get notifications and build your profile.